Declaration Of Conformity; Manufacturer's Warranty; Hilti Li-Ion Batteries - Hilti PMD 200 Manual De Instrucciones Original

11

Declaration of conformity

Conditions: Not USA
We declare, on our sole responsibility, that the product described here complies with the applicable
directives and standards.
The technical documentation is filed and stored here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
12 FCC statement (applicable in US) / IC statement (applicable in Canada)
This device has been tested and found to comply with the limits for a class A digital device, pursuant
to part 15 of the FCC rules. These limits are intended to ensure adequate protection against
electromagnetic interference when the device is operated in areas used for commercial purposes.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause interference to radio communications. The user must
bear costs incurred due to interference that operation of this device in residential areas can cause.
This device is in compliance with paragraph 15 of the FCC rules and the RSS­210 specifications of ISED.
Operation is subject to the following two conditions:
• This device shall cause no harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by Hilti may restrict the user's authorization to
operate the equipment.
13

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
14

Hilti Li-ion batteries

Instructions for safety and use
This documentation uses the term battery to describe rechargeable Hilti Li-ion battery packs containing
several Li-ion cells joined together. These batteries are to be used in Hilti power tools exclusively. When
using Hilti power tools, use only genuine Hilti battery packs!
Hilti batteries are state of the art and are equipped with cell management and cell protection systems.
Description
The batteries are composed of cells that contain lithium-ion storage materials that are capable of providing
high specific energy density. Unlike NiMH and NiCd batteries, Li-ion batteries have a minimal memory effect,
but they are extremely susceptible to external impact, deep discharge, and high temperatures. See Safety
Find our battery-powered products at your Hilti Store or at:
www.hilti.group | USA: www.hilti.com
Safety
▶ Do not under any circumstances modify or tamper with batteries!
▶ Never use recycled or repaired batteries not approved by Hilti Service.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
of more than one meter or are otherwise damaged. Examine your batteries regularly for signs of damage,
such as dents, cuts or punctures.
▶ Never use the battery or a battery-operated power tool as a hammer.
▶ Avoid eye or skin contact with leaking liquids!
▶ See What to do in case of damaged batteries
▶ Damaged batteries can leak fluid which may moisten adjacent objects. Clean these objects with warm
soapy water and replace the damaged batteries.
▶ See What to do in case of damaged batteries
▶ Never expose batteries to elevated temperature, sparking, or an open flame because the battery may
explode.
*2275630*
2275630 English 29