CAMPAGNOLO SUPER RECORD CHORUS Manual Del Usuario página 30

5.2 - CHAIN LENGTH FOR ELECTRONIC GROUPSETS
• Determine the correct length of the
chain positioning it on the sprocket and
the smallest chainring and ensuring that
the measurement H (Fig. 1), the distance
between the bottom part of the rocker and
the upper part of the chain, is about circa
10 - 15 mm.
• In order to avoid malfunctioning of the
drivetrain, the measurement H should not
under any circumstances be less than 3
mm and must not be greater than 22 mm
because, with a large sprocket and chain-
ring the chain would be excessively taut.
WARNING!
Perform all of the following operations and
remove extra links from the side of the chain
opposite the external link, which is identi-
fied by the plastic band and the adhesive
"WARNING!" label (Fig. 2).
30
5.3 - HOW TO SHORTEN THE CHAIN
H
1
2
H
ENGLISH