Tips And Recommendations For Use; Technical Data - SOMFY Sunea Screen 40 io Manual De Instrucciones

3.5.2. Deleting the favourite position (my)
1) Press my: the motorised product starts to move, and stops in the favourite
position (my).
2) Press my again until the motorised product moves: the favourite position (my)
is deleted.
3.5.3. Adding/Deleting Somfy control points and sensors
Refer to the corresponding instructions.

3.6. TIPS AND RECOMMENDATIONS FOR USE

3.6.1. Questions about the Sunea Screen?
Observations
The motorised product does
not operate.
If the motorised product still does not work, contact a drive and home automation professional.
3.6.4. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.

4. TECHNICAL DATA

Power supply
Radio frequency
Frequency bands and maximum power used
Operating temperature
Protection rating
Safety level
Maximum number of associated control points and sensors
As the manufacturer, Somfy SAS, F-74300 CLUSES hereby declares that the drive covered by these instructions, when
marked for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with the
essential requirements of the applicable European Directives, in particular the Machinery Directive 2006/42/EC and the
Radio Directive 2014/53/EU.
The full text of the Declaration of EU Conformity is available at www.somfy.com/ce.
Christian Rey, Head of Certification, on behalf of the Activity Director, Cluses, 03/2016.
Copyright © 2016 Somfy SAS. All rights reserved.
Possible causes
The control point battery is low.
The overheating protection on the drive has been
activated.
1
Check whether the battery is low and replace it if necessary.
Wait for the drive to cool down.
230 V
868-870 MHz io homecontrol®, two-way Tri-band
868.000 MHz - 868.600 MHz e.r.p. <25 mW
868.700 MHz - 869.200 MHz e.r.p. <25 mW
869.700 MHz - 870.000 MHz e.r.p < 25 mW
- 20°C to + 60°C
Category II
Images not contractually binding
2
Solutions
50 Hz
IP 44
9
EN
31