Tabla de contenido
Publicidad
Sonesse Ultra 50 RS485
3. USE AND MAINTENANCE
This motor is maintenance-free
For the safety of goods and people, Somfy motors are equipped with thermal protection
that will trigger the motor stops in the event of overheating.
Repeated activation of this protection can degrade motor performance.
If the motor goes to thermal protection, please check your installation and check that the
motor is rated for the intended use.
A normal installation is not expected to trigger this protection.
To avoid the drift of the end limits, do not cut the power supply more than 1 week.
3.1. OPERATION
To control the motor, please refer to the installation instruction of the used control.
3.2. TIPS AND RECOMMENDATIONS FOR USE
3.2.1. Questions about the Sonesse Ultra 50 RS485?
Observations
The motorised
product does not
operate.
If the motorised product still does not work, contact a motorisation and home automation
professional.
4. TECHNICAL DATA
Power supply
Operating temperature
Index protection rating
Safety level
Connector
SOMFY ACTIVITES SA, F-74300 CLUSES as manufacturer hereby declares that the drive covered by these instructions
when marked for input voltage 230V h 50Hz and used as intended according to these instructions, is in compliance with
the essential requirements of the applicable European Directives and in particular of the Machinery Directive 2006/42/EC
and EMC Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Philippe Geoffroy, Approval manager, acting on behalf of Activity director, Cluses, 07/2019.
Copyright
©
2015 - 2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Possible causes
The control point battery is weak.
The motor is in thermal protection
mode.
230V
50 Hz
Check whether the battery is weak and
replace it if necessary.
Wait for the motor to cool down.
120V
60 Hz
220V
0°C to + 60°C
IP 31
Class I
RJ9
Solutions
60 Hz
100V
50/60 Hz
EN
55
Publicidad
Tabla de contenido
