melitta Caffeo CI Manual De Instrucciones página 35

Inserting, changing and
removing the water filter
The Melitta Claris
®
lime and other harmful substances from
the water. The water filter should be
changed regularly, at the latest, however,
when the appliance prompts to do so.
The water filter is available in specialised
shops.
When the water filter is inserted, changed
or removed, this must be confirmed in the
Filter sub-menu. Once the water filter is
inserted or changed, the appliance resets
the water filter cycle to zero and is able to
prompt for changing the water filter again
at the right time.
Inserting the water filter
• Put the water filter in a glass with
tap water for several minutes before
inserting it in the appliance.
• Call up the Care sub-menu.
• Select Filter in the menu.
• Select Insert filter in the menu.
• Select Start in the menu.
• Flip up the lid of the water reservoir 6.
• Pull the water reservoir 6 up and out of
the appliance.
• Carefully screw the Melitta
water filter into the thread on the base
of the water reservoir using the screw-
in aid at the bottom end of the coffee
scoop provided.
• Fill the water reservoir 6 with tap water
up to the max. mark.
• Reinsert the water reservoir 6.
• Press the rotary switch 10 to confirm.
• Empty the vessel (min. 0.5 l capacity)
and place it under the outlet 3 again.
BA_CI_082016.indd 35
water filter removes
®
Claris
® ®
• Press the rotary switch 10 to confirm.
The appliance rinses and then returns to
standby mode.
The water hardness is automatically set
to Soft.
Changing the water filter
The water filter should be changed when
a prompt to do so appears on the text
display 4.
• Call up the Care sub-menu.
• Select Filter in the menu.
• Select Change filter in the menu.
• Select Start in the menu.
• Flip up the lid of the water reservoir 6.
• Pull the water reservoir 6 up and out of
the appliance.
• Unscrew the water filter from the thread
on the base of the water filter.
• Carefully screw the new Melitta
water filter into the thread on the base
of the water reservoir using the screw-
in aid at the bottom end of the coffee
scoop provided.
• Fill the water reservoir 6 with tap water
up to the max. mark.
• Reinsert the water reservoir 6.
• Press the rotary switch 10 to confirm.
• Empty the vessel (min. 0.5 l capacity)
and place it under the outlet 3 again.
• Press the rotary switch 10 to confirm.
The appliance rinses and then returns to
standby mode.
Claris
® ®
35
21.09.2016 07:24:43