Omnitronic CDP-2400 Manual Del Usuario página 27

1. SECTION UNIT 1
The left part of the controller is designed for controlling the left CD-player (1).
2. SECTION UNIT 2
The right part of the controller is designed for controlling the right CD-player (2).
3. OPEN/CLOSE BUTTONS
Via the Open/Close-buttons, you can open and close the respective CD-tray.
4. SEARCH-WHEEL
Via the Search-wheel, you can quickly scan forwards and backwards. Turn the Search-wheel to the right in
order to scan forwards and turn it to the right in order to scan backwards. The further you turn the Search-
wheel the higher the scanning-speed. In the pause-mode, the current frame is repeated as soon as you turn
the Search-wheel.
5. PARAMETER TIME-CONTROL
With the Parameter Time-control, you can adjust the effect time.
6. PARAMETER RATIO-CONTROL
With the Parameter Ratio-control, you can adjust the effect ratio.
7. TRACK-BUTTONS
Via the Track-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting
a track via the Track-buttons.
8. REVERSE-BUTTON
With the Reverse-button, you can activate the Reverse-function. Please refer to the explanations under 6.11
Effects.
9. SCRATCH/SKID-BUTTON
With the Scratch-button, you can activate the Scratch-function. Please refer to the explanations under 6.8
Interactive scratch-wheel and 6.11 Effects.
10. FILTER/PHASE-BUTTON
With the Filter/Phase-button, you can activate the Filter-function or Phase-function. Please refer to the
explanations under 6.11 Effects.
11. HOLD-BUTTON
With the Hold-button, you can hold the settings of the effect-parameters and sample-parameters. Please
refer to the explanations under 6.11 Effects.
12. ECHO/FLANGER-BUTTON
With the Echo/Flanger-button, you can activate the Echo-effect or Flanger-effect. Please refer to the
explanations under 6.11 Effects.
13. TRANS/PAN-BUTTON
With the Trans/Pan-button, you can activate the Trans-effect or Pan-effect. Please refer to the explanations
under 6.11 Effects.
14. AMBER/RED-BUTTON
With the Amber/Red-button, you can select the desired effect layer.
15. BEAT SYNC-BUTTONS
Via the Beat Synch-buttons, you can adjust the effects to the current track's beat.
16. MAIN TEMPO-BUTTON
With the MAIN TEMPO-button, you can adjust the pitch of an adjusted playback speed. Press the MAIN
TEMPO-button in order to adjust the pitch.
17. PITCH CONTROL-BUTTON
With this button, you can switch the speed-adjustment via the pitchfader off (LED off). Please refer to 6.6
Adjusting the playback-speed.
27/71 10602365X17NXS_V_1_0.DOC