Beat Sync-Function; Faderstart - Omnitronic CDP-2400 Manual Del Usuario

The Skid-time (PT) can be adjusted between 0 and 9990. The Skid-rate (PR) can be adjusted between 0
and 9990.
Filter-effect:
When choosing the Filter-effect, the original sound is modified in accordance with the Parameter-control.
The Filter-rate (PR) can be adjusted between 0 and 255.
Phase-effect:
When choosing the Phase-effect, the original sound is modified in accordance with the Parameter-control.
The Phase-time (PT) can be adjusted between 0 and 9990. The Phase-rate (PR) can be adjusted between 0
and 255.
Echo-effect:
When choosing the Echo-effect, an echo is added to the original sound. The Echo-time (PT) modifies the
repeating frequency and size of the echo and can be adjusted between 0 and 2000 ms.
The Echo-rate (PR) modifies the feedback of the echo-effect and can be adjusted between 0 and 255.
Flanger-effect:
When choosing the Flanger-effect, the effect of a jet engine is added to the original sound. The Flanger-time
(PT) modifies the sound of the flanger-effect and can be adjusted between 0 and 9990 ms.
The Flanger-rate (PR) modifies the depth of the flanger-effect and can be adjusted between 0 and 255.
Trans-effect:
When choosing the Trans-effect, the original sound is modified in accordance with the Parameter-control.
The Trans-time (PT) can be adjusted between 0 and 9990. The Trans-rate (PR) can be adjusted between 0
and 255.
Pan-effect:
When choosing the Pan-effect, the sound is cyclically directed to the left and right side. The Pan-time (PT)
modifies the changing speed and can be adjusted between 0 and 9990 ms.
Overview over the effect-parameters:
Effects
Reverse -1000 - 1000 ms
Skid 0-9990 ms
Filter 0-9990 ms
Phase 0 - 9900 ms
Echo 0 - 2000 ms
Flanger 0 - 9990 ms
Trans 0 - 9900 ms
Pan 0 - 9990 ms

6.12 Beat Sync-function

You can either adjust the effect-time via the Parameter Time-control or more comfortably via the Presets of
the Beat Sync-function.
Example:
Press the Auto BPM-button during playback and wait until the display shows the current value.
Press the Echo-button. Adjust the Parameter Time-control and watch the Beat Sync-LEDs.
When the Echo-time corresponds to a whole note, the 1/1 LED is lit.
In this way, the Beat Sync-LEDs show the most common time adjustments.
Via the Beat Sync-buttons, you can quickly and easily select the desired tact.

6.13 Faderstart

With the CDP-2400, you have the possibility to start the CD-player directly from the mixer. Make sure that
the Faderstart-socket is connected with the respective socket on the mixer. Additionally, the Audio Out-
Parameter PT
Adjustable value
0 ms
10 ms
6000 ms
300 ms
350 ms
1000 ms
450 ms
Default value Adjustable value
0 - 9990
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
35/71
Parameter PR
Default value
10
0
0
128
179
153
10602365X17NXS_V_1_0.DOC