Folding Procedure - Maruyama BCV5020 Manual Del Usuario

5. Accelerate and hold the engine at cutting speed before entering the material to be cut.
6. Always release the throttle trigger and allow the engine to return to idle speed when not cutting.
7. Stop the Brushcutter/ Grass Trimmer engine when moving between work sites.
・ If the cutting attachment becomes jammed, stop the engine immediately.
・Make certain all moving parts have stopped and disconnect the spark plug before inspecting the equipment
for damage.
・Never use a Brushcutter/ Grass Trimmer that has chipped, cracked or broken cutting attachment or gurard .
IMPORTANT: To detach the Harness and Brushcutter/ Grass Trimmer quickly from operator's body,
release the red plastic buckle.

Folding procedure

During transport the unit, you can fold the horn handle.
1. First stop the engine. Next attach the blade cover.
2. Loosen the knob, and unscrew it until the horn
handle can be turned clockwise.
3. Then folding backward horn handle, and twist the
horn handle 90 degrees.
4. Tighten the knob firmly.
― GB-15 ―
Loosen Knob
Fold
Backward
Twist