Cutting With Nylon Trimmer Line - Maruyama BCV5020 Manual Del Usuario

Cutting with Nylon Trimmer Line

POTENTIAL HAZARD
・Use of improper line could cause line to break and be thrown in operator's or bystander's
direction.
WHAT CAN HAPPEN
・Use of improper line could result in serious personal injury.
HOW TO AVOID THE HAZARD
・Use only good quality, commercial grade, weld resistant trimmer line with a diameter of 2,4mm.
・Do not use any type of wire or other string-like substance. Do not use metal-reinforced line.
・ The tip of the line does the cutting. The line should stay
extended while cutting.
・ Do not force the line into the material. Forcing the line
will cause it to slap against the material, increasing line
usage and causing poor cutting results.
Trimming
Hold the bottom of the trimmer head 5-10cm above the
ground and at an angle. Allow only the tip of the line to
make contact.

WARNING
― GB-16 ―
5-10cm above
Ground
CORRECT
INCORRECT
5-10cm above
Ground