Before Operation; Oil And Fuel - Maruyama BCV5020 Manual Del Usuario

Ocultar thumbs Ver también para BCV5020:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before Operation

Oil and Fuel

1. Mix and pour fuel outdoors and where there are no sparks or flames.
2. Always shut off the engine before refueling. Never remove the Brushcutter/ Grass Trimmer fuel tank cap
while the engine is running or immediately after stopping the engine.
POTENTIAL HAZARD
・Gasoline contains gasses that can build up pressure inside a fuel tank.
WHAT CAN HAPPEN
・fuel can be sprayed on you when removing fuel tank cap.
HOW TO AVOID THE HAZARD
・Remove fuel tank cap slowly to avoid injury from fuel spray.
3. Always open the fuel tank cap slowly to release any possible
pressure inside the tank.
4. Do not overfill the fuel tank. Stop filling 10mm from the top of the
tank.
5. Tighten the fuel tank cap carefully but firmly after refilling.
6. Wipe up any spilled fuel before starting the engine.
7. Move the Brushcutter/ Grass Trimmer at least 3m (10ft.) away from
the fueling location and fuel storage container before starting the
engine.
POTENTIAL HAZARD
・In certain conditions gasoline is extremely flammable and highly explosive.
WHAT CAN HAPPEN
・A fire or explosion from gasoline can burn you, others and cause property damage.
HOW TO AVOID THE HAZARD
・Use a funnel and fill the fuel tank outdoors, in an open area, when the engine is cold.
Wipe up any gasoline that spills.
・Do not fill the fuel tank completely. Add gasoline to the fuel tank until the level is 10mm
below the bottom of the filler neck. This empty space in the tank allows gasoline to expand.
・Never smoke when handling gasoline, and stay away from an open flame with gasoline in an
approved container and keep it out of the reach of children.
・Do not mix fuel for more than two month use.
WARNING
DANGER
― GB-10 ―
3m (10ft.)
Minimum

Publicidad

Tabla de contenido
loading

Tabla de contenido