Thermo Scientific Orion Star Manual Del Usario página 10

Display
Measurement Unit Icons
In the measurement mode, the arrow icon on the left side of the display screen
indicates the active line . Press
press / to scroll through the measurement unit icons associated with the
selected line . The measurement unit icons for the 5-Star multi-parameter meter are
shown below . The single and dual parameter meters will have fewer measurement
lines and icons, depending on the meter capabilities .
• The top line displays pH, mV, relative mV, ISE, or temperature .
• The middle line displays conductivity, TDS, salinity, resistivity, or temperature .
• The bottom line displays dissolved oxygen as % saturation, dissolved oxygen
as concentration, barometric pressure or temperature .
The units of measurement, which are displayed on the right side of the screen,
will flash until the reading is stable .
Note: If a measurement line is not needed, press
icon to the measurement line that is not needed and press
measurement line is completely blank.
EN-4
to move the arrow icon to the desired line and
Thermo Scientific Orion Star
to move the arrow
/ until the
and Star Plus Meter User Guide
™