Turning On The Instrument; Meter Maintenance - Thermo Scientific Orion Star Manual Del Usario

Meter Preparation
Meter Connections with Multiple Functions
• Use the BNC input to connect pH, ISE and ORP electrodes with a BNC
or waterproof BNC connector .
• Benchtop meters have a reference input that is used to connect a separate
reference electrode . Reference electrodes require an separate, appropriate
sensing electrode for measurements .
• The 970899WP dissolved oxygen probe can be used on the BNC input .
• Use the 8 pin miniDIN input for conductivity probes or for automatic temperature
compensation (ATC) probes .
• The DO AUTO-STIR probe uses the 9 pin miniDIN input and the stirrer jack .
• Connect a printer or computer to the RS232 input using the appropriate cable .

Turning on the Instrument

With the batteries installed in the portable meters and the power adapter attached
or the batteries installed in the benchtop meter, press
If using a 3-Star, 4-Star or 5-Star meter, press
to toggle the backlight on and off . When the benchtop meter is drawing line power,
the backlight will stay on until
To turn off the meter, press and hold

Meter Maintenance

For routine meter maintenance, dust and wipe the meter with a damp cloth .
If necessary, a warm water or a mild water-based detergent can be used .
Perform meter maintenance on a daily, weekly or monthly basis, as required
by the environment in which the meter is operated .
Immediately remove any spilled substance from the meter using the proper
cleaning procedure for the type of spill .
EN-10
is pressed .
for about three seconds .
Thermo Scientific Orion Star
to turn on the meter .
when the meter is powered on
and Star Plus Meter User Guide
™