Meter Features - Thermo Scientific Orion Star Manual Del Usario

Introduction

Meter Features

To better meet the needs of users in environmental protection and control, food
and beverage, pharmaceutical and consumer product laboratories, the Orion Star
and Star Plus series meters include these key features:
• Password Protected Methods – The meter will save up to ten custom
measurements and calibrations for future reference . Password protection
of each method eliminates any tampering with methods as multiple users
access only the procedure most appropriate to their work .
AUTO-READ
•
or logs data when the reading becomes stable . The measurement is frozen
on the display until the user prompts the meter to take a new measurement .
Stirrer Control – All 3-Star, 4-Star and 5-Star benchtop meters have a stirrer
•
control for the stirrer probe, Cat . No . 096019, and the AUTO-STIR
that eliminates the need for magnetic stir plates and stir bars .
SMART STABILITY
•
by automatically compensating for measurement conditions and optimizing the
meter response time .
Display Backlight – All 3-Star, 4-Star and 5-Star meters include a display
•
backlight feature . When the meter is on, a quick press of
backlight on and off . When the meter is operating on battery power, the
backlight will automatically turn off after two minutes to conserve power .
When batteries are low, the backlight will no longer turn on .
Automatic Shutoff – The meters will shut down after 20 minutes without
•
a keypress . This maximizes battery power on portable meters and benchtop
meters that are being run on battery power .
Audible Signals – The meter will beep whenever a key is pressed, providing
•
immediate verification that the user's input was received .
An easy-to-use reference guide, attached to each meter, supports daily meter use .
EN-2
– The meter takes a measurement and automatically prints
™
and SMART AVERAGING
™
Thermo Scientific Orion Star
BOD probe
™
– Remove the guesswork
™
will turn the
and Star Plus Meter User Guide
™