Viewing And Printing The Datalog And Calibration Log - Thermo Scientific Orion Star Manual Del Usario

Viewing and Printing the Datalog and Calibration Log

The 3-Star, 4-Star and 5-Star Plus meters have been enhanced to include
a calibration log view feature in addition to the datalog view, datalog print and
calibration log print features . The Orion Star meters include the datalog view,
datalog print and calibration log print features .
To view the datalog or calibration log:
1 . In the measurement mode, press
2 . Press /
the calibration log (Star Plus meters only) .
3 . Press . The meter will display the date/time screen . The log number will be
on the top of the screen and the time, date and year the log was recorded will
be on the top, middle and bottom display lines respectively . Press
to scroll through the log .
4 . Press . The meter will display the data or calibration point associated with
the selected date/time screen .
a . Press
b . Press
c . Press
5 . To exit the log view mode, press
screen and press
To send the datalog or calibration log to a printer or computer:
1 . Connect the meter to a printer or computer and verify the meter baud rate and
output settings in the setup menu .
2 . In the measurement mode, press
Thermo Scientific Orion Star
to scroll through
to print the individual data point .
/ to scroll through the log .
to return to the date/time screen .
.
and Star Plus Meter User Guide
™
.
to view the datalog or
until the meter displays the date/time
.
Data Archival and Retrieval
to view
/
EN-51