Technical Characteristics; Battery Life - EdilKamin TINY Instalación Uso Y Mantenimiento

OPTIONAL REMOTE CONTROL code 633280 FOR KELLY MODEL
: ignition / shutdown button
+
: button to increase the power/operating temperature (when inside a menu, it increases the displayed variable)
-
: button to increase the power/operating temperature (when inside a menu, it decreases the displayed variable)
A : button to toggle from manual and automatic mode
M : button to toggle from automatic to manual mode
An infrared remote control is easily identified through radio transmission as it has its transmission LED at the
tip. Refer to photo "A" below.

TECHNICAL CHARACTERISTICS

When a button is pressed, the backlight goes on, which indicates that the remote control is transmitting the signal. The
"beep" emitted by the stove confirms its reception.
CAPACITY
- the remote control transmits by means of an infrared signal within a range of 4-5 metres. The LED transmission
signal must be in line with the receiving LED of the stove for the signal to be transmitted correctly. This must also be
in a free-field environment, therefore, free of obstacles, is possible to cover a distance of 4-5 meters.

BATTERY LIFE

the remote control works with 3 alkaline 1.5V AAA batteries. Their duration depends upon usage, however, the avera-
ge duration is that of an entire season.
- The operating temperature is: 0-40°C
- The correct storage temperature is :-10/+50°C
- Operating humidity is: 20-90% R.H with no condensation
- Degree of protection is: IP 40
- Weight of remote control with batteries: 160gr
INSTRUCTIONS FOR USE
Photo "A"
48