Status Displays; Switching The Controller Off; Function Menu (Fnc); Display Illumination - Hilti POS 150 Manual De Instrucciones

5.2.3 Status displays

Important tool status information is displayed in the top right-hand corner of the screen.

5.3 Switching the controller off

Press the on / off button.
Please note that when switching off or restarting, the user is asked to confirm this action, just to be sure.

6 Function menu (FNC)

Overview of the functions available

6.1 Display illumination

Display illumination can be switched on / off using the display illumination button.
When switched on, the intensity of the illumination can be varied over five levels from 1/5 to 5/5 by continuing to press
the display illumination button.
NOTE
The brighter the display, the more power is consumed.
Cancel and return to previous screen.
@
The controller is switched off completely.
;
The controller is restarted. Any data not already
= saved will be lost.
End the Hilti application. The controller will re-
% main switched on.
Guide light: Normal, fast, automatic, switch off
@
Laser pointer on / off
;
Adjust backlight
=
Wireless on / off, select wireless channel
%
PPM: Settings for atmospheric corrections
&
Level (bubble level): Bring up the electronic
level and laser plummet
(
Compensator on / off
)
Set standard measuring target
+
Brief description of all functions (Help)
§
en
45