2)
Number of displayed items
In stop mode
A
LapTime
RecRemain
AllRemain
Clock
1)
Display order
2)
Number of displayed items
3
Press the jog lever.
The display changes as follows.
Display window on the recorder
While recording
A
Track number
Track number
1)
Current date
1)
Appears only when the clock is set.
In stop mode
A
Track number
1)
Track name
1)
Disc name
2)
Current date
1)
Appears only if the track has been labeled.
2)
Appears only when the clock is set.
18
-GB
1)
2)
B
C
1
4
2
4
3
4
4
4
A
B
B
Elapsed time
Remaining time for
recording
1)
Current time
B
Elapsed time
Remaining time for
recording
Remaining time after
the current location
2)
Current time
z
The display that appears on the remote control
is different from the ones on the recorder. See
"On the remote control" (page 19) to check the
display that appears on the remote control.
To know the recording
condition
The indicator lights up or flashes
according to the recording condition.
Recording
condition
While recording
Recording standby flashes
Less than 3
minutes'
recording time
available
A track mark has
been added (when
controlling by the
recorder only)
Whether you use the controls on the
recorder or the remote control, the REC
indicator lights up or flashes in the same
way.
z
If you want to check the playing position or
track name while playing, see page 26.
REC indicator
lights up
flashes according
to the loudness of
the source while
recording with a
microphone (voice
mirror)
flashes slowly
goes off
momentarily