Data Detection Mode; Selecting The Type Of Vehicle - Snap-On EEWB334A Manual De Operador

6b
7 9
5-4

5.4 Data detection mode

5.4.1 Selecting the Type of Vehicle

Select the Type of Vehicle before the measuring run.
7b
— In the screen of the RIM DATA ENTRY Menu (Fig.
— Select the TYPE OF VEHICLE item according to
When the selection has been made, the Type of
Vehicle in use identifi cation icon will be displayed in
the Information Field (7b,Fig. 5-4).
Fig. 5-4: Assignation of Types of Vehicle Items:
7 Standard vehicle wheel (car) - nominal dimensions
9 Light industry vehicle wheel (Van) - nominal
10
10 Motorcycle wheel - nominal dimensions in inches
EEWB334A
5-4) press the TYPE of VEHICLE key.
the rim.
in inches . The measuring unit inches is displayed.
Normal and Alu 1 to Alu 5 weight positioning can be
selected. To select a standard wheel with nominal
dimensions in mm ( TD or TRX wheels), press the
"mm" item (6b,Fig. 5-4).
dimensions in inches.
The threshold value for suppression is automatically
doubled when this type is chosen.
with imbalances resolved and suppressed in the
same way as car wheels.
25