Snap-On EEWB334A Manual De Operador página 57

25
27
7-4
Code C21
Indication of: Software version, Model code and
Kernel version
Example: Program version 1.22 for wheel balancer
model XXX, for Kernel version YYY .ZZZ.
—
1.22 is displayed.
26
—
XXX appears.
—
YYY.ZZZ appears.
Code C28
28
Select one of the 10 stored error codes and clear
the error memory
The last 10 different error codes are written to the error
memory so that they can be called up and reported
by the operator of the wheel balancer, e.g. for remote
diagnosis of malfunctions. The most recent error code
is written to memory location 1 and the previous error
codes are shifted to the higher memory locations.
—
—
The Kernel No. of the fi rst error in the list appears.
—
—
Code C29
Language selection displayed on screen
The machine has several user interface languages.
For example, the following are available:
English (Fig. 7-4), German, Italian, French, Spanish,
Portuguese, Chinese, Korean, Japanese, Russian.
—
—
—
Important:
—
* = Factory adjusted mode
EEWB334A
Press the OK key;
To see the model code, press key 27;
To see the Kernel version, press key 26;
From the MAIN MENU press 3 three times.
Select code C28, then press OK.
Press key 27 to display the error code number
(left) and the total repetitions of the error (right).
Press key 25 to display the second error in the
list, in the same way.
key 28 = Clear error memory.
From the MAIN MENU press 3 three times.
Select code C29, then press OK.
Select the desired language, then press OK.
Perform code C10 to set the selected language
in the permanent memory.
57