Error Reset; User Parameter Setting - Gree Versati III Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation Instructions for Versati III

2.2.15 Error Reset

[Operation Instructions]
At the function setting page, by touching "Error reset", a choice box will pop up, where by touching "OK" the
error will be reset and by touching "Cancel" the error will not be reset.
[Notes]
● It can be performed only when the unit is turned off.
2.2.16 WiFi Reset
[Operation Instructions]
At the function setting page, by touching "WiFi", a choice box will pop up, where by touching "OK" , the WiFi
setting will be reset, and by touching "Cancel" the choice box will quit and WiFi will not be reset.
2.2.17 Reset
[Operation Instructions]
At the function setting page, by touching "Reset", a choice box will pop up, where by touching "OK" all user
parameter settings will be reset and by touching "Cancel" it will back to the function setting page.
[Notes]
● This function is allowed only when the unit has turned off.
● This function is valid for "Temp. timer", "Clock timer", "Preset mode", "Weekly timer", and "Weather depend".

2.3 User Parameter Setting

[Operation Instructions]
1. At the menu page, by touching "PARAMETER", it will back to the parameter setting page, as shown in the
figure below.
2. At the menu setting page, by touching the page turning keys, it is able to switch to the page where the desired
parameter is.
3. After that, this setting will be saved by touching "OK" and then the unit will run based on this setting. While
this setting will give up by touching "Cancel".
Parameter Setting Page
13

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido