Bose QUIETCOMFORT 35 II Instrucciones Importantes De Seguridad página 34

Ocultar thumbs Ver también para QUIETCOMFORT 35 II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 138
T R O U B L E S H O O T I N G
Symptom
No sound
Poor sound quality
No sound from a device
connected by the back-up
audio cable
Poor sound quality from
a device connected by
audio cable
Battery won't charge
Your Google Assistant not
responding
Action button does
not change the noise
cancelling mode
3 4 - E N G L I S H
Solution
• Power on the headphones and charge the battery.
• Check the state of the status indicators (see page 21).
• Increase the volume on your headphones, your mobile device
and music source.
• Slide the Power/Bluetooth switch
hear the connected device. Make sure you are using the correct
device.
• Move your mobile device closer to the headphones and away
from any interference or obstructions.
• Use a different music source.
• Connect another mobile device (see page 28).
• If two mobile devices are connected, pause your other
device first.
• If two mobile devices are connected, move the devices within
range of the headphones (30 ft. or 10 m).
• Use a different music source.
• Connect another mobile device (see page 28).
• Disconnect the second device.
• Move your mobile device closer to the headphones and away
from any interference or obstructions.
• Secure the ends of the back-up audio cable.
• Increase the volume on your headphones, your mobile device
and music source.
• Connect another device (see page 28).
• Secure the ends of the back-up audio cable.
• Connect another device (see page 28).
• Secure the ends of the USB charging cable.
• Try another charging source.
• If your headphones have been exposed to high or low
temperatures, let the headphones return to room temperature
and try charging again.
• Make you are in a country where the Google Assistant
is available.
• For additional support, visit: support.google.com/assistant
• Make sure your headphones are powered on.
• Make sure the Action button is set to noise cancellation.
• Use the Bose® Connect app to change the noise
cancelling mode.
to the right and release to

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido