Ottobock 1E91 Runner Instrucciones De Uso página 21

Required tools: 241 636K13 Loctite®, 710D4 torque wrench
>
1) Loosen the 2 Allen head screws on the underside of the adapter.
→ The adapter can now be moved.
2) Set the required position of the adapter.
3) Secure the 2 Allen screws with Loctite® and tighten (torque: 12 Nm).
Turning
The pyramid adapter of the connection adapter can be rotated to any posi­
tion. The pyramid adapter is fixed when the set screws of the adapter that is
attached proximally are tightened.
Required tools: 241 636K13 Loctite®, 710D4 torque wrench
>
1) Loosen the two set screws that are screwed in the furthest and located
next to each other.
2) If the pyramid adapter cannot be turned: Carefully tap the pyramid
adapter from the top to loosen it.
Set the desired rotation angle.
3) Secure the set screws with Loctite® and tighten (for the required torque,
see instructions for use of the respective adapter).
6 Cleaning
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
CAUTION
Failure to follow the maintenance instructions
Risk of injuries due to changes in or loss of functionality and damage to the
product
► Observe the following maintenance instructions.
► Following an individual period for the patient to get accustomed to the
product, check the settings of the prosthesis and, if necessary, adapt
them.
► Arrange regular maintenance intervals with the patient depending on the
level of use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
Ottobock | 21