SATA filter 100 prep Instrucciones De Servicio página 248

<< Operating instructions SATA filter 100/101/103 prep >>
filter.
6. Safety Instructions
6.1. General safety instructions
• Before using the filters, please read the safety and operating instruc-
tions completely and carefully. Safety instructions and specified steps
are mandatory.
• Keep all enclosed documents and pass on the filter together with
these documents only.
6.2. Filter specific safety instructions
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Use, cleaning and maintenance by skilled personnel only!
• Never use the filter when it is damaged or when components are
missing!
• Check and, if necessary, repair the filter on a regular basis!
• Put filter out of operation immediately when it is damaged!
• Never carry out unauthorised or technical modifications on the filter!
• Use original SATA spare parts and accessories only!
6.3. Use in explosive areas
The filter is approved for the use in explosive areas classified as Ex-zone
1 and 2.
The SATA filter 100/101/103 prep due to their conception, design and
construction comply with the basic safety requirements of the directive
94/9/EU. The respective documents required by directive 94/9/EU Annex
VIII are deposited for 10 years at the designated location, number 0123
with the documentation number 70023722.
7. Assembly
7.1. SATA filter 100 prep and 103 prep
• Install mounting bracket [1-2] on the filter
Warning! Attention!
Warning! Attention!
US
XXVI.3