Installation; Installing The Electrode Arm (Optional For El20); Installing The Batteries (El2) - Mettler Toledo EL20 Instrucciones De Manejo

Installation

3. Installation
Carefully unpack the meter. Keep the calibration certificate in a safe place.
Insert the right adapter clip into the power adapter slot:
3.1

Installing the electrode arm (optional for EL20)

The electrode arm can be fastened to EL20 on the left or the right side.
. Remove the electrode stand rubber cover on that side of the bench meter where you prefer the stand.
Keep the cover in a safe place;
2. Insert the electrode stand firmly into the opening as shown;
3. Fix the opening of the arm upon the stand from above, adjust it to a moderate height.
3.2

Installing the batteries (EL2)

4
Five_pH_edu.indb 4
Cinch
METTLER TOLEDO Education Line pH meter
BNC
12.03.2007 15:08:46