Preparing The Appliance For Operation - Unold 78245 Instrucciones De Uso

23. The blades of the stainless
steel sieve have very sharp
edges. Therefore, avoid tou-
ching them. Grasp the sieve
only on the edge.
24. The motor must come to a
complete standstill before
you can take off the moving
parts.
25. Never open the lid when the
appliance is still in opera-
tion.
26. The appliance is not inten-
ded for continuous opera-
tion. Therefore, do not allow
the appliance to operate for
more than 3 minutes; there-
after, it must cool down.
27. To avoid damage, do not use
the appliance with accesso-
ries of other manufacturers
or brands.
Caution: Only use the included tamper for filling the ingredients.
For safety reasons, ensure that hands, hair, articles of clothing
or other tools cannot get into filling shaft of the juicer.
The motor must come to a complete standstill before you can
take off the moving parts.
Never open the housing of the appliance. This can result in
electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

PREPARING THE APPLIANCE FOR OPERATION

1. Before assembling, ensure that
you are assembling the appliance
on a level, dry, substrate.
2. Remove all packaging materials
and transport safeguards. Keep
the packaging material, such as
plastic bags or Styrofoam away
24
28. Do not operate the appliance
if the stainless steel sieve is
damaged!
29. Unplug the mains plug from
the electrical outlet after use
and before cleaning. Never
leave the appliance unatten-
ded when the mains plug is
plugged in.
30. Clean the appliance after
every use as described in
the chapter "Cleaning and
Care".
31. Check the appliance, the
plug and the power cord
regularly for wear or damage.
In case of damage to the
power cord or other parts,
please send the appliance
for inspection and repair
from small children - danger of
suffocation!
3. Clean all parts with a damp
cloth as described in the chapter
"Cleaning and care".
4. Place the appliance on a suitable
level work surface.