Before Using The Appliance The First Time; Assembly - Unold 78265 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safeguards. Keep packag-
ing materials away from children – danger of suffocation!
2. Check whether all parts are present. Contact our customer service organisa-
tion if parts are missing or damaged.
3. Clean all parts with a damp cloth, as described in the section "Cleaning and
care".
4. Ensure that the motor block is stable.

ASSEMBLY

1. Place the motor block on a stable, level substrate. Ensure that the appliance
is switched off.
2. A silicone stopper (A) is on the underside of the bowl. Check whether it cov-
ers the opening in the bowl.
3. Place the bowl on the housing. Ensure that the round opening of the bowl is
precisely centred over the metal axle of the primary housing. The bowl can
only engage in a specific position. Consequently place the bowl precisely
over the three white hooks on the primary housing. Turn the bowl forward
with pressure until it locks in place. Ensure that the bowl correctly locks in
place otherwise the appliance will not start.
4. Place the silicone sieve insert into the bowl and firmly press in the sieve
insert.
5. Select the desired microsieve. The following micro-sieves are available:
ƒ Microsieve fine
ƒ Micro-sieve coarse if you desire a lot of fruit pulp
ƒ Microsieve sorbet if you want to make sorbet from frozen fruit (attention:
Stand 18.2.2020
Copyright UNOLD AG | www.unold.de
if you desire minimal fruit pulp
do not crush any ice cubes!)
31 von 116