Disassembly; Cleaning And Care - Unold 78245 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
the appliance off to prevent the
motor from being damaged. In
this case, unplug the power plug

DISASSEMBLY

When
extracting juice, switch the
appliance
the switch on "0". Wait until
juice no longer flows out and
the stainless steel sieve is no
longer turning.
Unplug the plug from the
electrical outlet.
1.
Remove the juice pitcher.
2.
Remove the tamper from the fil-
ling shaft.
3.
Open the closure bracket by
carefully pressing it upward and
slightly forward away from the
appliance.

CLEANING AND CARE

We recommend cleaning the appliance immediately after extracting juice.
Otherwise, dried pulp remnants are difficult to remove.
Caution: The stainless steel
sieve is sharp - danger of
injury!
Switch off the appliance by
placing the switch on "0". Wait
until juice no longer flows out
and the stainless steel sieve is
no longer turning.
Unplug the plug from the
electrical outlet.
1.
Disassemble the appliance as
described in the section "Disas-
sembly".
2.
Remove the pomace from the
pomace container and any pulp
remaining in the juice collection
tray.
you
have
finished
off,
by
placing
and allow the appliance to cool
for at least 30 minutes.
4.
Remove the transparent lid.
5.
Remove the stainless steel sieve.
To do this you must pull gently
on the sieve and turn it approxi-
mately 30°. However, grasp the
sieve only on the edge, since the
blades in the sieve are an injury
hazard.
6.
Remove the juice collection tray
and the pomace container.
7.
Empty the pomace container. You
can use the flat end of a dish
brush for this.
8.
Remove any pulp remaining in the
juice collection tray.
3.
Clean parts (except the motor
block) in warm water to which
you have added a little washing-
up liquid. The sieve can easily
be cleaned using a normal dish
brush made of plastic. However,
only grasp the sieve on the edge,
to prevent injuries from the sharp
blades. Ensure that you remove all
remaining pulp from the sieve to
obtain high juice yields the next
time you use the appliance. If
necessary, you can also soak the
sieve in water before cleaning it.
27

Publicidad

Tabla de contenido
loading

Tabla de contenido