Data Management; Menu Structure Of Data Menu; Measurement Data - Mettler Toledo SevenCompact S210 Instrucciones De Manejo

7 Data management
7.1 Menu structure of data menu
1.

Measurement data

1.1 Review
1.2 Transfer
1.3 Delete
1.4 Export to USB-stick
2. Calibration data
2.1 pH
2.1.1 Review
2.1.2 Transfer
2.1.3 Delete
2.1.4 Export to USB-stick
3. ISM Daten
3.1 Initial Calibration Data
3.2 Calibration History
3.3 Maximum Temperature
3.4 Reset ISM
7.2 Measurement data
Review
All
All stored measurement data can be reviewed; the most recent data saved appears on the display.
●
Press Transfer to send the measurement data (current single set) to the printer or PC.
Partial
The measurement data can be filtered according to 3 criteria.
● Memory number (from MXXXX to MXXXX)
● Sample ID
● Measurement mode
Memory number
1 Enter the memory numbers of the data and press Select.
The measurement data is displayed.
2 Scroll through the measurement data to review all measurements between the two memory num­
bers.
3 Press Transfer to send the measurement data (current single set) to the printer or PC.
Sample ID
1 Enter the sample ID and press OK.
The meter finds all stored measurements with this sample ID.
2 Scroll through the measurement data to review all measurements with the entered sample ID.
3 Press Transfer to send the measurement data (current single set) to the printer or PC.

Data management

31