Technical Data; Ec Declaration Of Conformity - HSM 104.3 Instrucciones De Servicio

HSM 104.3

8 Technical data

Cutting type
Shred size (mm)
Sa fe ty ra ting German DIN 32757 – 1
Cutting ca pa ci ty (sheets)
DIN A4
Weight
Cutting speed
Lo ading width
Voltage
Power for the maximum number of
sheets
Dimensions W x D x H (mm)
Volume of shredded material bag
Noise level (Idle running/ load)

EC Declaration of Conformity

Machinery directive 98 / 37 / EC
EMC directive 89 / 336 / EEC
Low voltage directive 73 / 23 / EEC
The manufacturer HSM GmbH + Co. KG, Bahnhofstraße 115, D-88682 Salem, Germany declares herewith, that the
paper shredder HSM 104.3 corresponds with the above mentioned EC Machine Directive including all relevant modifi -
cations.
Applied standards and technical specifi cations:
• EN 294:1992
• EN 55014-2:1997 + A1:2001
• EN 61000-3-3:1995 + A1:2001
Salem, 02.11.2005
Machine type inspection for compliance with the requirements of the EC Machinery Directive was carried out by the
„Administration/Inspection Authority Committee of Experts, Subject Area Offi ce Machines and Devices", on the premis-
es c/o Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4, 22297 Hamburg, Germany. This inspection authority is
the authority responsible in accordance with Annex V of the EC Machinery Directive.
10
5.8
2
70 g/m
2 22 - 24
80 g/m
2 17 - 19
• EN 60950-1:2001
• EN 61000-3-2:2000
• EN 55014-1:2000 + A1:2001 + A2:2002
Rolf Gasteier - Technical Manager
Strip cut
3.9 1.9
2 3
16 - 18 12 - 14
13 - 15 9 - 12
11.5 kg
80 mm/s
240 mm
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
440 W
375 x 279 x 583
33 l
58 dB(A) / 59 - 63 dB(A)
Cross cut
3.9 x 30 1.9 x 15
3 4
12 - 14 9 - 11
9 - 11 7 - 9
12.5 kg
90 mm/s
0802