Please read the safety instructions (P.3) before using this cleaner. This product complies with the directives
ENGLISH
2006/95/EC and 2004/108/EC.
CAUTIONS
●
The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
●
DO NOT use hot air or hot surface to dry filters. Dry them at room temperature for approximately 24 hours.
●
IMPORTANT: Before re-installing the washable filters, make sure they are completely dry to avoid damaging
the appliance.
First, assemble the parts together.
(Hose, Telescopic wand, Floor nozzle)
•
MC-CG695
Align the raised
section with the
hole.
Parts are set surely so as not to come
off.
2
Adjust the nozzle
to suit the floor
Carpet
•
MC-CG691
Carpet
Alternative nozzles
Crevice nozzle:
For narrow gaps, etc.
Upholstery nozzle:
For cushions, covers,
etc.
Dusting brush
(MC-CG695 only)
Cord rewind pedal
Please check the following first if you have any problems.
If your problem is still not solved, consult your local retailer.
'It won't switch on!'
Check that the plug is connected firmly and the socket outlet
is working normally.
(If a thermal cut-out device has activated, please wait approx.
60 minutes until it has reset)
20
•
MC-CG691
Telescopic wand
Length may be adjusted.
Parquet
•
flooring
MC-CG695
Parquet
flooring
Floor nozzle
•
MC-CG695
Press the
mark,
not the edge of the
switch.
Trouble Shooting
1
Start operation
Press
Press the
the edge of the switch.
Release button
•
MC-CG691
Hose
Dust cover
Dust indicator
Turn the power control to the highest setting and
lift the nozzle off the fl oor. If the dust indicator
turns red, the dust bag is full and requires
replacing the dust bag.
If the product still does not work, please take it to an
authorized service centre for repair.
mark, not
Adjust power
by turning
Variable power control
ON/OFF Switch
pedal
Dust bag (in body)
The dusting brush can be set
between the telescopic wand
and the floor nozzle if you want.
Remove the floor nozzle by
pressing the release pedal and
you can use the dusting brush
easily anytime.
(MC-CG695 only)
Plug
Mains lead