Replacing The Dust Bag - Panasonic MC-CG695 Manual De Instrucciones

Please perform the following
before storing.
●
Turn off the power.
●
Rewind the mains lead.
(Hold the plug to ensure the mains lead
does not jump.)
●
Store the supplied nozzles.
Please replace a new dust bag
in the following cases:
●
When the indicator turns red.
(Turn the power control to the higest
setting and lift the nozzle off the
floor.)
●
Suction power has dropped.
If suction power does not return after removing dust...
Check for blockages in hose, telescopic wand, and nozzles. Clean the pre-motor filter.
Remove the dust bag first.
●
Cleaning
●
pre-motor
filter
●
Cleaning ●
nozzle
●
After one year
has passed...
Attention
●
Do not use detergent or any other cleaning liquids.
●
Do not wash the pre-motor filter in a washing machine or dry it with a dryer other source of hot air.
●
Attach the pre-motor filter correctly (to avoid damaging motor).

Replacing the dust bag

Caring for your cleaner
Remove the pre-motor filter and
tap to release dust.
Gently wash with water and dry in
shade if dust is not easily removed.
Using an old toothbrush or similar
tool,clean any dirt or lint from the
brush.
Do not wash with water.
Replace the Exhaust filter.
Storing
Storage position
•
MC-CG695
Exhaust filter
(HEPA filter)
Park position
If the dust bag is not properly
installed, the dust cover will not close.
•
MC-CG691
●
To close
21