Cutting Attachment - Stihl MS 290 Manual De Instrucciones

English / USA

Cutting Attachment

Recommended cutting attachments
for compliance with § 5.11 of ANSI
Standard B 175.1-2000
(see page 14 of this Manual):
MS 290:
STIHL reduced kickback bar
(with green label) for 0.325"
and 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
1)
STIHL low kickback chain
(with green label):
for 0.325" (8.25 mm) pitch:
Rapid-Micro 2 (26 RM 2)
for 3/8" (9.32 mm) pitch:
Rapid-Micro 2 (33 RM 2, 36 RM 2)
Chain sprocket: 7-tooth for 0.325" pitch
8-tooth for 0.325" pitch
7-tooth for 3/8" pitch (spur sprocket)
MS 310:
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
1)
STIHL low kickback chain
(with green label):
for 3/8" (9.32 mm) pitch:
Rapid-Micro 2 (33 RM 2, 36 RM 2)
Chain sprocket:
7-tooth for 3/8" pitch (spur sprocket)
58
MS 390:
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
1)
STIHL low kickback chain
(with green label):
for 3/8" (9.32 mm) pitch:
Rapid-Micro 2 (33 RM 2, 36 RM 2)
Chain sprocket:
7-tooth for 3/8" pitch (spur sprocket)
In order to comply with the kickback
performance requirements of § 5.11
of ANSI Standard B 175.1-2000,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.11 requirements
on this specific powerhead, or has been
designated as "low kickback" saw
1)
chain in accordance with the ANSI
B 175.1-2000 standard.
1)
See definition of "low kickback
chain" on page 17 of this Manual.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
MS 290
For 0.325" and 3/8" pitch:
Rollomatic "S" with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
Duromatic with stellite tipped nose
16, 18 or 20 in (40, 45 or 50 cm)
MS 310
For 3/8" pitch:
Rollomatic "S" with sprocket nose
16, 18, 20, 25 or 30 in
(40, 45, 50, 63 or 70 cm)
Duromatic with stellite tipped nose
16, 18, 20 or 25 in
(40, 45, 50 or 63 cm)
MS 390
For 3/8" pitch:
Rollomatic "S" with sprocket nose
16, 18, 20, 25 or 30 in
(40, 45, 50, 63 or 70 cm)
Duromatic with stellite tipped nose
16, 18, 20 or 25 in
(40, 45, 50 or 63 cm)
STIHL yellow -labeled chains:
MS 290
Rapid-Micro (26 RM, 33 RM, 36 RM),
Rapid-Super (26 RS, 33 RS, 36 RS)
MS 310
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RS, 36 RS)
MS 390
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RS, 36 RS)
MS 290, 310, 390