Fueling; Starting / Stopping The Engine - Stihl FC 55 Manual De Instrucciones

Fueling

Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
After fueling, tighten fuel cap as
securely as possible by hand.
FC 55
Starting / Stopping
the Engine
3 1 2
5
7 6
Controls
Stop switch (1) with positions:
I – normal run position (2) and
O – stop (3).
Throttle trigger interlock (4), throttle
trigger (5) with spring-loaded tongue (6)
and notch (7) in tongue.
4
Starting
: Set stop switch to position I
: Press down the throttle trigger
interlock and hold it there.
: Squeeze the throttle trigger and
engage the tongue (6) in the
housing (arrow).
: Now release the the throttle trigger,
tongue and throttle interlock in that
order. This is the starting throttle
position.
English / USA
6
19