Sound Adjustments; Selecting The Dsp Modes (Dsp) - JVC KD-SH1000 Manual De Instrucciones

Sound adjustments

Selecting the DSP modes (DSP)

You can create a more acoustic sound field such
as in a theater, hall, etc.
• When crossover network (see page 18) is
activated, the DSP mode is fixed to "Defeat."
DSP modes
Defeat (No acoustic effect is applied), Theater, Hall,
Club, Dome, Studio, V.Cancel (Voice Cancel: Reduces the
vocal sounds. Good for mastering your favorite songs—
Karaoke.)
~
Enter the DSP menu (see page 4).
Ÿ
Select one of the DSP modes.
To finish the procedure
•
To adjust the effect level
•
For "Defeat" and "V.Cancel," the effect
level is not adjustable.
!
Adjust the effect level.
To finish the procedure
•
To make more precise settings, see the
following.
To cancel the acoustic effect, select "Defeat" in
step Ÿ.
1
2
3
4
Go to step !.
Precise settings for the DSP modes
Select a DSP mode.
Select the number of the built-in
speakers.
• For "Defeat" and "V.Cancel," the speaker
number is fixed to "4ch."
Select your listening seat position.
Select the speaker to be adjusted.
* Appears only when "4ch" is selected in step
.
2
Continued on the next page
15