Grundfos CIM 260 Instrucciones De Instalación Y Funcionamiento página 9

LED2 status
LED2 status
Off
Flashing red.
Permanently red.
Permanently green.
During startup, it may take up to 5 seconds
to update the LED2 status.
Description for CIM 260
The CIM 260 has been switched off.
No internal communication between
the CIM 260 and the Grundfos
product.
The CIM 260 does not support the
Grundfos product.
Internal communication between the
CIM 260 and the Grundfos product is
OK.
Description for CIM 280
The CIM 280 has been switched off.
After commissioning, the LED2 will
flash red if the communication to the
Grundfos product is lost.
The product driver is not downloaded
from Grundfos Remote Management
(GRM) or Grundfos iSolution Cloud
(GiC) yet. When the CIM 280 is
switched on, the LED2 may turn
green for one minute before it turns
permanently red.
Internal communication between the
CIM 280 and the Grundfos product is
OK.
9