Disposal Of Used Oil; Characteristics Of The Machine - OP TUBOMATIC H46 Manual De Uso

OP S.r.l.
Via Serpente 97 25131 Brescia Italia Tel. +39.030.3580401 Fax. +39.030.3580838
________________________________________________________________________________________________
17. Always use original spare parts in order not to alter the original characteristics and the
validity of the certification.
18. Do not operate the manual pump during maintenance or when replacing tools.
19. Upon completing the operation, always reassemble the guards you have removed
before starting the machine.
20. Avoid inserting your hands in the crimping area while the motor is running. When
inserting the hose for fitting, always make sure that the distance between your hand
and the crimping area is at least 120 mm.
21. Limitations
• The machine is not designed to be used in explosive settings
• The machine is not designed to be used in outdoor settings
• The machine must not be exposed to environmental agents that do not comply with
the degree of protection of the installed components
22. The machine may exhibit residual risks if used improperly. Always follow the
instructions detailed in the Operation and Maintenance Manual.
23. Do not insert animals or limbs in the operating area or in areas with
24. Do not insert plastic, glass or other types of objects in the operating area or in areas
with moving parts.
25. Do not repair the machine directly, but have it serviced by the manufacturer.

DISPOSAL OF USED OIL

Recommended viscosity range: 10...200 mm2/sec; the machine is delivered with HLP 10
DIN 51524 oil.
AGIP ACER 15 or an equivalent oil (viscosity, at 40°C 15 mm2/s DIN 51524) can be used
for fittings.
Do not disperse used oil in the environment. Always comply with current national and/or
European regulations.

CHARACTERISTICS OF THE MACHINE

TUBOMATIC H46 and H46/E is a robust and light machine designed to be easily
transported to the working area and to crimp hydraulic circuit hoses.
The machine requires no maintenance except for lubrication.
moving parts.
23
E
N
G
L
I
S
H