Sony HandycamVision CCD-TRV10 Manual De Instrucciones página 55

When the CHARGE lamp flashes
Check through the following chart.
Remove the battery pack from the AC
power adaptor. Then install the same
battery pack again.
When the CHARGE lamp flashes
again
Install another battery pack.
When the CHARGE lamp flashes
again
The problem is with the AC power
adaptor.
Please contact our nearest Sony dealer
in connection with the product with
the problem.
∗ If you use a battery pack which you have just bought or which has been left unused for a long time,
the CHARGE lamp may flash at the first charging. This does not indicate a problem. Repeat again to
charge with the same battery pack.
When the CHARGE lamp does not
flash again
If the CHARGE lamp lights up and
goes out after a while, there is no
problem.*
When the CHARGE lamp does not
flash again
If the CHARGE lamp lights up and
goes out after a while, the problem is
with the battery pack installed first.
55