Using A Car Battery; Letting The Subject Monitor The Shot; Utilización Con La Batería De Un Automóvil; Para Hacer Que El Sujeto Observe La Videofilmación - Sony HandycamVision CCD-TRV10 Manual De Instrucciones

Tabla de contenido

Publicidad

To remove the adaptor
The adaptor is removed in the same way as the
battery pack.

Using a car battery

Use Sony DCP-77 DC pack (not supplied).
Connect the cord of the DC pack to the cigarette
lighter socket of the car (12 V or 24 V). Connect
the DC pack to the battery mounting surface of
the camcorder.
To remove the DC pack
The DC pack is removed in the same way as the
battery pack.
Letting the subject
monitor the shot
You can turn the LCD panel over so that it faces
the other way and you can let the subject monitor
the shot while shooting with the viewfinder.
Turn the LCD panel vertically first until it clicks,
then turn it over. The
the LCD screen (Mirror mode) and the date and
remaining battery indicators disappear.
2
indicator appears on
1
Para quitar el adaptador
Quítelo igual que la batería.
Utilización con la batería de un
automóvil
Utilice un paquete de CC DCP-77 Sony (no
suministrado).
Conecte el cable del paquete de CC a la toma del
encendedor de cigarrillos de un automóvil (12 o
24 V). Conecte el paquete de CC a la superficie de
montaje de la batería de la videocámara.
Para quitar el paquete de CC
Quítelo igual que la batería.
Para hacer que el sujeto
observe la videofilmación
Usted podrá girar la pantalla de cristal líquido
para que quede encarada de forma que el sujeto
pueda ver las imágenes mientras usted
videofilme a través del visor.
Gire en primer lugar verticalmente la pantalla de
cristal líquido hasta que chasquee, y después dele
la vuelta. En la pantalla de cristal líquido
aparecerá el indicador
los indicadores de fecha y de batería restante
desaparecerán.
(Modo de espejo) y
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Handycamvision ccd-trv12

Tabla de contenido