Air Supply; Maintenance Work - salmson SIE Serie Instalacion Y Puesta En Servicio

10.1

Air supply

10.2

Maintenance work

Installation and operating instructions SIE-DIE-PBE
DANGER! Risk of fatal injury!
Failure to install safety devices on the module or near the coupling
can cause electrical shock or contact with rotating parts, poten-
tially resulting in life-threatening injuries.
• After maintenance, all safety devices such as module covers or
coupling covers that were removed must be reinstalled!
DANGER! Risk of fatal injury!
The pump itself and the parts of pump can be extremely heavy.
Falling parts pose a risk of cuts, crush injuries, bruises or impacts,
which may lead to death.
• Always use suitable lifting equipment and secure parts against fall-
ing.
• Never stand underneath a suspended load.
• Make sure the pump is securely positioned and is stable during
storage and transport as well as prior to all installation and other
assembly work.
DANGER! Risk of burns or freezing to the pump when body parts
come into contact with the pump!
Depending on the pump or system operating conditions (fluid tem-
perature), the entire pump can become very hot or very cold.
• Keep a safe distance during operation!
• In the case of high water temperatures and system pressures, allow
the pump to cool down before all work.
• Always wear protective clothing, protective gloves and protective
goggles when working.
DANGER! Risk of fatal injury!
The tools used during maintenance work on the motor shaft can be
flung out if they come into contact with rotating parts, and cause
serious or even fatal injuries.
• The tools used during maintenance work must be removed com-
pletely before the pump is started up.
• If the transport eyes are moved from the motor flange to the motor
housing, they must be resecured to the motor flange following the
installation or maintenance work.
The air supply to the motor housing must be checked at regular inter-
vals. In case of contamination, ensure that an air supply is re-estab-
lished in order to allow the both the motor and the module to cool
sufficiently.
DANGER! Danger of death!
Falling pumps or pump parts may result in life-threatening injuries.
• When performing installation work, protect the pump components
against falling.
DANGER! Risk of fatal injury!
There is risk of fatal injury due to electric shocks when working on
electrical equipment. Following removal of the module, a poten-
tially fatal shock voltage may be present at the motor contacts.
• Check for absence of voltage and cover or cordon off adjacent live
parts.
English
93