Setup Submonitor Connect - Franklin Electric SUBMONITOR CONNECT Manual De Instalación Y Funcionamiento Del Propietario

COMMUNICATIONS
FE Connect Mobile App

Setup SubMonitor Connect

Use the following procedure to program a SubMonitor Connect that has been paired with the FE Connect
mobile app.
1. On the app Home display, tap the desired product family to enter the Connections display.
2. Tap one of the listed Previous Connections to choose a previously connected device or tap +New Connection
(see previous page). You will see a message, "Connecting to Device..." and a progress bar. You have the
ability to Cancel if necessary.
3. The app establishes a connection to the device and shows the Monitoring display.
4. Tap Setup at the upper left of the display. Choose each option under Setup to verify that all SubMonitor
Connect settings are correct. Refer to
settings. The white right-facing arrowhead indicates further programming is available when pressed.
Use the left-facing arrowhead at the top of the display to go back a menu level.
When setup programming is complete, many more features are available within the app for both controlling
the SubMonitor Connect and fine-tuning its performance.
36
"Enter Basic Parameters" on page 17 for more information about