Choosing The Ring Melody; Changing The Pin Code; Setting The Dialing Mode; Flash Time Duration - Topcom BUTLER E400 Manual De Usuario

7.2

Choosing the ring melody

The base and each handset can ring with a different melody. To set the base melody:
1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "BASE MELODY" and confirm.
4 Select a melody (1 to 5).
5 Confirm or return to the previous menu.
7.3

Changing the PIN code

Certain functions are only available to users who know the PIN code.
By default the PIN code is 0000. To change the PIN code:
1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "PIN CODE" and confirm.
4 Enter the old 4 figure PIN code and confirm.
4 5 6
GHI JKL MNO
5 Enter a new 4 figure PIN code and confirm.
4 5 6
GHI JKL MNO
6 Enter the new PIN code a second time and confirm.
4 5 6
GHI JKL MNO
7.4

Setting the dialing mode

There are two types of dialing mode: DTMF/Tone dialing (most common) and pulse dialing (for
older installations).
To change the dialing mode:
1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "DIAL MODE" and confirm.
4 Select the dialing mode and confirm.
7.5

Flash time duration

Press the flash key 'R' (key 7 - picture 2D Handset) to use certain services on your external line
such as "call waiting" (if your phone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The Flash key 'R' is a brief interruption of the line. You can set the
flash time to 100ms or 250ms.
1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "RECALL" and confirm.
4 Choose "RECALL1" for short flash time (100ms) or "RECALL2" for long
flash time (250ms) and confirm.
Base settings
15