Installing The Handset - Topcom BUTLER E400 Manual De Usuario

Getting started
2.3

Installing the handset

Before you use the telephone for the first time, you must first make sure the battery
is charged for 20 hours. If you do not do this, the telephone will not work optimally.
2
- 2A Back view of base -
A. Telephone wall outlet
B. Power cable
C. Telephone cord
1 Open the battery compartment as shown on picture 2B.
2 Insert the batteries respecting the polarity (+ and -).
3 Close the battery compartment.
4 Leave the handset on the base unit for 20 hours.
- 2B Back view of handset -
A. Cover
B. Rechargeable batteries
B
A
C
A
B