König Electronic HAV-MC100 Manual De Uso página 11

31 SETUP
This key is used to set up the system language, TV mode, screen display, video
output and audio output of the disc. Follow these step by step instructions for use:
Press the setup key during playback, and use the directional keys to navigate
within the menu and the screen will display the different menus which enable you
to program the machine. After you have made the adjustments, press the setup
key to exit this menu. Note: You can also set up the system while the disc is not
playing.
32 ENTER
Press this key to confirm selections in the menu displayed on the screen.
33 TITLE
Press this key to return to the title menu of the DVD disc.
34 ZOOM
Press this key when playing a DVD/VCD, the original picture will be increased by
2x,3x,4x,1/2x,1/3x,1/4x.
35 PBC
During playback of a disc more advanced than the VCD1.1, press this key to display
the PBC menu on the screen. You can then choose the play mode. Press it again
to cancel the function. You can only choose the program using the number keys or
with the skip forward/ backward keys.
36 EQ
When the machine is switched on, press the EQ key to change the balance mode.
Options: JAZZ, CLASSIC, ROCK, POPS.EQ OFF.
37 MAIN VOLUME (UP/DOWN)
Press this key to adjust the volume.
38 TONE
Press to select the main volume, bass, treble and sub woofer volume mode, then
press vol+/- key to adjust the volume.
39 MICROPHONE VOLUME
During MIC ON mode, press this key and then press vol+/- key to adjust the
microphone volume.
11