Product Description And Specifications; Intended Use; Product Features - Bosch GCM 350-254 Professional Manual Original

OBJ_BUCH-2953-001.book Page 32 Wednesday, December 21, 2016 3:02 PM
32 | English
Symbols and their meaning
3 601 M22 6..
254mm
3 601 M22 6B0
254mm
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Shows the rotation direction of the SDS
bolt for tightening the saw blade (counter-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever shut:
The set bevel angle of the tool arm is
locked.
Clamping lever open:
Adjusting bevel angles is possible.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Fence
2 Adjustable fence
1 609 92A 39K | (21.12.16)
When sawing bevel angles
or mitre angles > 45°, the
adjustable fences must be
pulled outwards or re-
moved completely.
30mm
25.4mm
3 Stop for standard bevel angles 47°, 45°, 33.9° and
22.5°
4 Scale for bevel angle
5 Right bevel angle indicator
6 Locking screw for slide device
7 Clamping lever for any bevel angle
8 Speed regulator(not available for all country-specific
product versions)
9 Transport safety-lock
10 Transport handle
11 Blade guard
12 Handle
13 Locking lever
14 Laser protection cap
15 Retracting blade guard
16 Roller
17 Mounting holes
18 Saw table
19 Insert plate
20 Locking bracket
21 Locking knob for various mitre angles
22 Mitre detent lever
23 Tilt protector
24 Mitre angle indicator
25 Detents for standard mitre angles
26 Scale for mitre angle
27 Saw-table extension
28 Recessed handles
29 Holes for quick-action clamp
30 SDS bolt
31 On/Off switch
32 On/Off switch for laser (cutting line indication)
33 Laser warning label
34 Chip ejector
35 Locking screw of the adjustable fence
36 Slide device
37 Hex key (6 mm/4 mm)
38 Quick-action clamp
39 Adjusting screw of depth stop
40 Depth stop
41 Left bevel angle indicator
42 Stop for 0° standard bevel angle
43 Chip deflector
44 Spindle lock
45 Hex socket screw for mounting of saw blade
46 Clamping flange
47 Saw blade
48 Interior clamping flange
49 Clamping screw for saw-table extension
50 Threaded rod
51 Wing bolt
Bosch Power Tools