Introduction; Intended Use; Features - Parkside PDWS 125 A1 Instrucciones De Uso

AIR ANGLE GRINDER
PDWS 125 A1

Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified areas of application. Please also
pass on these operating instructions to any future
owner.

Intended use

The compressed air tool is intended for grinding
and abrasive cutting metal and similar materials
without the use of water. Any other use of or modi-
fication to the machine is deemed to be improper
and carries the risk of serious personal injury.
Not for commercial use.
Explanation of the symbols
Read the instruction manual
WARNING!
before use.
Wear safety goggles!
Rotation direction
Oil daily!
P03/2016 Production date
V03/2019 Expiry date
Read the original operating
instructions and safety instructions
before initial operation.
Wear ear protection!
│ GB │ MT
■ 44
Wear sturdy work boots!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding
Using damaged cutting or grin-
ding discs is dangerous and may
cause serious injury!
Intended for metal grinding
Diameter of the disc

Features

Air connection with filter
Plug nipple 1/4"
ON/OFF switch
Safety lock-out
Protective cover
Spindle
Auxiliary handle
Rear clamping flange
Grinding disc
Front flange
Open-ended spanner
Two-hole spanner
Oil container
Teflon tape
Hex key
PDWS 125 A1