Transport; Storage; Recycling Or Disposal Of Your Machine - Garland FOREST 1220 Manual De Instrucciones

English

10. TRANSPORT

It is necessary to disconnect the engine when moving
the machine between different working areas.
Stop the engine and leave it to cool for fi ve minutes
before transporting or putting the tool away.
Always transport the tool with the engine switched off,
the chain bar covered by the guard and the exhaust
away from the body.
11. STORING
Stop the engine and leave it to cool for fi ve minutes
before transporting or putting the tool away.
Keep the tool away from children.
Always cover the bar with the protector when you
store the machine.
Never store the tool with fuel in the tank, inside a
building in which the vapors from the fuel could enter
into contact with a fl ame, a spark or an intense source
of heat.
If the machine is not going to be used and will be
stored for a prolonged period of time, empty the fuel
and the carburetor tanks, clean the parts, take the
machine to a safe place and make sure the engine
has cooled.
The exhaust silencer will still be hot even after the
engine has stopped. Do not place the machine in
places where infl ammable material (dry grass, etc.)
gases or infl ammable liquids can be found.
12. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the Environment. Recycle used oil by this
machine and take it to a recycling or follow local
recommendations. Do not empty into drains, soil,
rivers, lakes or seas.
Dispose of your machine in an
ecological manner. We should not
get rid of the machine with our
domestic rubbish. Its plastic and metal
components can be reclassifi ed and
can be recycled
46/124