Transport; Storage; Recycling Or Disposal Of Your Machine - Garland MONTANA 110 Manual De Instrucciones

English

10. TRANSPORT

It is necessary to always turn off the engine when
transporting the machine between different working
areas.
Once the machine is turned off, wait 5 minutes to
allow it to cool before transporting it. Always transport
the machine with the engine switched off and the
protection of the installed roof.
To transport the chainsaw, hold the front handle with
the machine off, chain and sword covered with lid and
making sure it is not touching any part of the body.
Handling the chainsaw properly will reduce the
likelihood unintentional contact with the chain of the
chainsaw.
If you are transporting the chainsaw in vehicles,
secure it firmly to prevent it from slipping or tipping
over.

11. STORAGE

Once the machine is off, wait 5 minutes for it to cool
down before storing the machine.
The machine's exhaust pipe will remain hot after
turning the engine off. Do not ever store the machine
in places near flammable materials (dried grass or
wood...), gas or fuels.
Be sure to store the machine in a place not accessible
to children.
Always put the chain guard and rod guard when
storing the machine.
If you plan to store the machine in a closed place,
first empty the fuel and oil deposits since fumes could
come into contact with a flame or hot body and ignite.
If you are storing the machine for a long period of
time empty the fuel and oil tanks, clean all parts of
the machine and store the machine in a safe and dry
place. Make sure that the engine is cool before storing
the machine.
The machine's exhaust pipe will remain hot after
turning the engine off. Do not ever store the machine
in places near flammable materials (dried grass or
wood...), gas or fuels.
12. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the Environment. Recycle used oil
by this machine and take it to a recycling or
follow local recommendations. Do not empty
into drains, soil, rivers, lakes or seas.
Dispose of your machine in an ecological
manner. We should not get rid of the
machine with our domestic rubbish. Its
plastic and metal components can be reclassified and
can be recycled
62/160