Control Panel; Getting Started; Operation Of The Induction Hot Plate - Unold 58205 Manual De Instrucciones

the manufacturer does not assume any warranty in case of improper or incorrect use or after repair by
unauthorized third parties.

control panel

1
1 Watts: Power setting indicator lamp
°C: Temperature setting indicator lamp
2 q button
3 Watt/°C display
4 p button

gettIng started

1. Remove all packaging material.
2. Clean the appliance with a damp cloth.
3. Place the appliance on an even, firm and dry
surface with sufficient space on all sides.

operatIon oF the InductIon hot plate

1. Plug the power cord into an electrical outlet.
2. A short signal tone will sound. The indicator
lamp in the ON/OFF button blinks.
3. Press the ON/OFF button to switch the
appliance on.
4. The Watt/°C button blinks to indicate that
the appliance is ready for operation.
5. You can control the appliance either by the
power output or the temperature. Press the
Watt/°C button to switch between the two
modes. The power and temperature setting
can be changed at any time during cooking
by pressing the q/p
setting for „Watt" is 800 watts, and for „°C"
it is 160 °C.
6. Select the mode by pressing the Watt/°C
button. The indicator lamp for the selected
setting lights up.
14
2
3
button. The basic
4
5 ON/OFF indicator lamp
6 ON/OFF button
4. Connect the plug to a wall socket.
7. Now select the power in watts or tempera-
ture in °C by means of the q/p buttons.
8. The following settings are possible:
Watts: 300, 600, 800, 1.000 and 1,200
watts
°c: 60, 80, 160, 180, 200 °C.
9. The appliance can be switched off at any
time during cooking by pressing the ON/OFF
button.
10. The selected settings are not saved in case
of a power outage, for example.
11. The fan continues to run for about
60 seconds after the appliance is switched
off.
12. After two hours at the latest the appliance
automatically switches off.
13. After use, unplug the power cord from the
electrical outlet to save energy.
5 6