Unpacking And Content - Genesis GMT15A Manual Del Operario

WArnIng:
USE OF THIS TOOL CAn gEnErATE AnD DISBUrSE DUST Or OTHEr AIrBOrnE PArTICLES, InCLUDIng WOOD
DUST, CrYSTALLInE SILICA DUST AnD ASBESTOS. Direct particles away from face and body. Always operate
tool in a well-ventilated area and provide for proper dust removal. Use dust collection system wherever possible.
Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung
disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with the dust. Allowing dust to
get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly
fitting nIOSH/OSHA approved respiratory protection appropriate for dust exposure, and wash exposed areas with
soap and water.
YOUr MULTI-PUrPOSE OSCILLATIng TOOL
1. ON/OFF Switch
2. Cast Aluminum Gear Head
3. Oscillating Spindle and Blade holder
4. Flush Cutting Blade 1-3/16"
5. 3" Wood and Drywall saw Blade
6. Rigid Scraper blade
7. Hook & Loop Sanding Pad
8. Sandpape
r

Unpacking and Content

IMPOrTAnT:
Due to modern mass production techniques, it is unlikely the tool is faulty or that a part
is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the
fault has been rectified. Failure to do so could result in serious personal injury.
Contents in Package:
Description
Oscillating Tool
1-3/16" (30mm)Flush Saw Blade
3" Wood and Drywall Saw Blade
Rigid Scraper Blade
Hook & Loop Sanding Pad
Sandpaper
Allen Wrench
Cap screw and washers
Operator's Manual
Multi-Purpose Oscillating Tool
Operator's Manual
2
3
7
QTY
1
1
1
1
1
3
1
1
1
1
8
GMT15A
5
6 4