Genesis GMT15A Manual Del Operario página 9

ACCESSOrIES
nOTE: This tool must be used only with gEnESIS oscillating tool accessories.
Model Picture
GAMT301
GAMT302
GAMT303
GAMT304
GAMT305
GAMT306
MAInTEnAnCE
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be
damaged by their use. use clean cloths to remove dirt, dust, oil, grease, etc.
WArnIng:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come
in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal
injury.
Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommended using
this tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool
using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
TWO-YEAr WArrAnTY
This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal
wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to return your tool
to store location of purchase, please call Toll-Free Help Line for possible solutions. THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR
COMMERCIAL PURPOSES.
TOLL-FrEE HELP LInE
For questions about this or any other GENESIS Product, please call Toll-Free:
www.richpowerinc.com
Or visit our website:
Description
Flush Cut Saw Blade Assortment
Pack,
Size: 3/8" (10mm),
Size: 3/4" (20mm),
Size: 1-3/16" (30mm)
3" Wood & Drywall Saw Blade
(HSS)
1/8" Grout Removal Blade
Scraper Blade Twin pack:
Rigid Scraper Blade(Left)
Flexible Scraper Blade(Right)
Sandpaper Assortment Pack
(3) 60 grit, (3) 80 grit, (3) 120
grit, (3) 240 grit
Bi-Metal Flush Cut Saw Blade
for Metal and Wood, 1-3/8"
(35mm)
Recommended Application
Cutting and flush cuts in Wood, Plastic, Drywall and
other soft materials.
For example:
-Flush cutting door jamb or base molding.
-Cut-outs in furniture for cable connections.
Cutting in Wood, Plastic, Drywall and other Soft
Materials.
For example
-Cutting opening in flooring for venting
-Cutting opening for electrical boxes
For removing grout from floor or wall tiles for
replacement or restoration.
-Rigid Scraper Blade to remove vinyl flooring and
bonded carpeting, old coats of varnish/paint and other
adhesives.
-Flexible Scraper Blade to remove caulk, coats of
peeling paint or soft adhesives.
For detail sanding.
Cutting or flush cuts in non-ferrous metals, wood,
plastic,drywall and other soft materials.
For example:
-Cutting copper pipe Cutting copper pipe
-Cable ducts flush against walls, floors or ceilings
888-552-8665
.
9